Bus-bar Joint Shrouds / Boots
Insulating the bus bar & Switchgear joints is very unmanageable and exceptional job owing to a very exceptional job owing to a very complex and varied profile of the joints in the layouts that are of much customized nature. Because of this majority of the joints are left open without insulations. Therefore in many advanced countries & some Indian MNCs have made it mandatory to use flexible shrouds made of PVC Plastisols for insulation of joints.
We, at Shine Industries, are Designing, Developing, Manufacturing Company that Manufacture, Supply and Export of Top Best Quality Product Bus-bar Joint Shrouds / Boots. We are Vadodara - Gujarat based Power Cable Accessories Manufacturer & Supplier in India and Exporter to all over the World.
|1||Tensile Strength||11 N/mm² (MPA) (Min.)||ASTM D 412-06a|
|2||Ultimate Elongation||250% (Min.)||ASTM D 412-06a|
|3||Longitudinal Change||0.5% (Max.)||ASTM D2671|
|4||Hardness||60 ± 10 Shore D||ASTM D2240|
|5||Water Absorption||0.5% (Max.)||ASTM D570|
|6||Accelerated Ageing for 110°Cfor 300 Hrs|
|Tensile Strength||9 N/mm2 (Mpa) (Min.)||ASTM D 412-06a|
|Ultimate Elongation||150% (Min.)||ASTM D 412-06a|
|7||Heat Shock (120°C for 4 Hrs.)||No Cracking or flowing||ESI 09-11|
|8||Continuous Temperature limit||-40°C to + 110°C||IEC 216|
|9||Dielectric Strength||6 to 12 KV/mm.||ASTM D149|
|10||Volume Resistivity||1012 Ohm.cm||ASTM D257|
Note: Shrouds are all Customise. We shall require Drawings for the Shrouds.