Silicone Overhead Line Insulation Sleeve (SOLIS)
Silicone Overhead Line Insulation Sleeve (SOLIS) is made of silicone rubber and widely applied in transformer station protections or railway catenary system and performs effective in cross line. Easy & quick installation widely used in the electrification railway and naked wire in substation for insulating protection. These covers are designed to insulate existing bare lines without costly conductor replacement expenditure or additional line hardware.
We, at Shine Industries, are Designing, Developing, Manufacturing Company that Manufacture, Supply and Export of Top Best Quality Product Silicone Overhead Line Insulation Sleeve (SOLIS). We are Vadodara - Gujarat based Power Cable Accessories Manufacturer & Supplier in India and Exporter to all over the World.
Product Features
Ordering Reference:
| Sleeve Diameter SOLIS (mm) | Φ 15 | Φ 16.5 | Φ 20 | Φ 24 | Φ 32 | Φ 35 |
| Suitable up to ACSR Conductor | 80 sq.mm | 100 sq.mm | 150 sq.mm | 200 sq.mm | 420 sq.mm | 560 sq.mm |
Technical Data:
| Sr. No. | Properties | Value | Standard |
|---|---|---|---|
| Physical | |||
| 1 | Tensile Strength | 8 N/mm² (MPA)(Min.) | ASTM D 412-06a |
| 2 | Ultimate Elongation | 200% (Min.) | ASTM D 412-06a |
| 3 | Water Absorption | 0.5% (Max.) | ASTM D570 |
| Thermal | |||
| 4 | Heat Shock (250oC for 30 Mins.) | No Cracking or flowing | ESI 09-11 |
| 5 | Thermal Aging (120℃, 500h) | ||
| a. | a. Tensile Strength change | 6 N/mm² (MPA) (Min.) | ASTM D 412-06a |
| b. | b. Elongation at break change | 150% (Min.) | ASTM D 412-06a |
| Electrical | |||
| 6 | Dielectric Strength | 12 kV/mm (Min.) | ASTM D149 |
| 7 | Volume Resistivity | 1X1015 Ohm.cm (Min.) | ASTM D257 |